AK Interactive Microfiller Primer Spray - Gray 150ml

Product detailed description

AK Interactive base paint in spray. Great for all metal, plastic or resin models or figures. Dries quickly and offers a perfect surface finish. The included microfiller is great for filling in unevenness, dents, scratches and other imperfections on the surface. For even better results, it is recommended to sand the resulting dry surface with fine sandpaper.

The colored top of the can shows the exact shade of the spray.

Volume: 150ml

Note: The color shade presented on the monitor or in print may differ slightly from the actual one.

Modeling spray paint intended for spraying on plastic, metal, wood, ceramics, textiles, or other suitable surface.

Not suitable for children. Children's work with paint must always be supervised by an adult. Flammable, hazardous fumes, ventilate the room thoroughly when working. Do not use open flames or sources of sparks. Do not store near heat sources. Do not eat, drink or smoke while working. In case of contact with eyes and mucous membranes, rinse with clean water and seek medical advice. In case of inhalation problems, provide fresh air, ventilate. In case of ingestion, do not induce vomiting, seek medical advice immediately. Do not drink or eat the contents of the container, do not apply it to the skin.
H phrases: H222 - Extremely flammable aerosol. H229 - Pressurized container: May burst if heated. H319 Causes serious eye irritation. H335 - May cause respiratory irritation. H336 - May cause drowsiness or dizziness. H412 - Harmful to aquatic life with long lasting effects. EUH066 - Repeated exposure may cause skin dryness or cracking. P-phrases: P101 - If medical advice is needed, have product container or label at hand. P102 - Keep out of reach of children. P103 - Read label before use. P210 - Keep away from heat/sparks/open flames/hot surfaces. No smoking. P211 - Do not spray on an open flame or other ignition source. P251 - Pressurized container: do not pierce or burn, even after use. P260 - Do not breathe dust/fume/gas/mist/vapours/spray. P264 - Wash hands thoroughly after handling. P271 - Use only outdoors or in a well-ventilated area. P410 + 412 - Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F. P501 - Dispose of contents/container in accordance with national regulations. Symbols: see below.

Stir the paint well before use by shaking the container, it is recommended to do so for at least 1 minute.

Painting: Apply to a well-degreased, dry and clean surface in an even thin layer from a distance of 20 - 40 cm. It is better to apply 2 - 3 thin layers in succession than one thick one. For spraying absorbent surfaces, it is recommended to apply several layers of paint, but only after the previous layer has completely dried.

Drying time: The paint dries to the touch within 20 - 30 minutes, but complete drying takes at least 4 hours, depending on the thickness of the layer. It is recommended to wait at least 16-24 hours for the next coating.

Cleaning the nozzle: After spraying, turn the can upside down and briefly press the valve. Wipe the paint residue from the nozzle with a dry cloth, or one soaked in a spray gun cleaner such as Tamiya Airbrush Cleaner or another brand.