AMEWI RC heli DRF AFX-135 PRO brushless 6-Channel 352mm 6G RTF 1/32

Product detailed description

RC model of the EC-135 helicopter in 1:32 scale painted in the colors of the German air rescue service.

Thanks to the high-quality electronics, the AFX-135 PRO offers extremely smooth flight behavior, which is why it is also suitable for beginners. The flight time is about 8-10 minutes with an integrated battery that includes a USB charging port. The battery monitoring function informs you of its status in good time so that your model never runs out of power in the air.

The 2.4 GHz transmitter with ergonomic levers fits comfortably in your hand and has various flight modes for beginners and advanced pilots. It allows you to switch from mode 2 to mode 1. Another great feature is the stabilized inverted flight by pressing a button, which you can activate from a height of about 9 meters to get used to such an inverted maneuver. Automatic takeoff and automatic landing are also functions of the RC model.

With two high-performance brushless motors in the front and rear, this model offers sufficient overall power for impressive flight capabilities that will appeal to even more experienced pilots. The RC helicopter is also equipped with automatic altitude hold thanks to optical and electronic sensors. Every single rivet on the plastic cabin is faithfully reproduced. LED lighting in the front, bottom and rear.

The DRF AFX-135 PRO is delivered as an RTF (Ready-to-Fly) version, which means that all components are already included in the package, except for the batteries for the transmitter. After charging the battery, you can take off immediately. Before using the model for the first time, read the operating instructions carefully.

What are the responsibilities when operating a drone, RC airplane or RC helicopter?

Features:

Automatic takeoff and automatic landing
Optical and electronic sensors
Detailed fuselage with many scale attachments like the original
Aluminum swashplate
Intelligent 1200mAh 7.4V LiPo battery
LiPo checker and 5V output for other optional accessories such as a camera or landing lights
Quality transmitter with many functions and ergonomic shape for easier handling
Switch from mode 2 to mode 1

Technical parameters:
Scale: 1:32
Fusel length: 352 mm
Fusel height: 132 mm
Rotor head height; 120 mm
Rotor diameter: 328 mm
Tail rotor diameter: 70 mm
Main motor: 2507 Brushless
Rear motor: 1204 Brushless
Servos: 3 micro servos / cyclic
Remote control: 2.4 GHz, 6 channels, mode 2 and mode 1
Range: approx. 50-80m
Battery: LiPo 2S 7.4V 1200mAh, hard case with integrated USB charging port, 75x35x28mm, 79g
Flight time: 8-10 min
Charger: USB cable
Charging time: approx. 60-90 min

Package contents:
Model
Remote control
Battery
USB charging cable
Spare rotor blades
User manual DE/EN

Required accessories:
4x 1.5V AA batteries for the transmitter

Quick instructions for use:

Battery charging: Use the included USB cable and connect the battery to the USB charger. Charging is automatic. After pressing the button, the charge status is displayed. 4 green LEDs = 100%.

Basic flying:
Always fly in a sufficiently large area.

1. Insert the batteries into the transmitter and the model.
2. Turn the transmitter ON and then turn the model ON (press the button on the battery 2x).
3. Place the model on a flat surface and do not move it. After a while, the model will activate and emit a sound signal.
4. Stand behind the model so that its tail is pointing towards you.
5. Unlock the motor lock by pulling both levers together and into opposite corners. The rotor will spin.
6. Carefully apply the throttle for a moment, lift the model to a height of about 1 meter and let it hang. Leave the throttle lever in the middle position.
7. Move the levers very slowly with small jerks to familiarize yourself with the movements of the model.
8. To land, pull the throttle lever towards you. To turn off the motor, hold the throttle lever all the way down for at least 3 seconds. Or, for a quick shutdown, pull both levers together and into the inner corners.
9. After turning off the motor, always turn off the model first and then the transmitter. We recommend removing the battery from the model.