Milled Fibre glass fibers 50g

Product detailed description

This product is used to increase the strength of glued joints. These are small pieces of glass fibers that, together with epoxy glue, create a very strong material.

Simply mix the fibers into epoxy glue (use 60-minute epoxy) and then apply the glue to the place you want to glue or reinforce. In addition to high strength, the glued joint has high resistance to cracking and also has high volume stability - it does not shrink.

You can also use glass fibers with thin cyanoacrylate glues (e.g. Roketa Hot). A few drops of glue are enough and the resulting material will be very strong.

Recommended use
Reinforcing epoxy glues.
Gluing partitions into composite hulls of RC airplanes, RC boats.
Gluing large cracks or smaller missing parts of stressed parts. To create a repair putty (i.e. high strength is not required), we recommend using microballoons.
Fillers shorten the workability time of epoxy adhesives, so we recommend using 60-minute epoxy if possible.

Safety warning
Store out of reach of children. Wear gloves and a mask / respirator when working.

In case of skin contact: If irritation occurs, wash the affected area with soap and cold water. Do not use hot water, as hot water opens the pores of the skin, into which glass fiber particles can enter.
In case of eye contact: Rinse eyes with water for 15 minutes. Do not rub eyes. If symptoms persist, seek medical attention.
In case of inhalation: Move person to fresh air. If symptoms persist, seek medical attention.