UHU PLUS glue 2 min epoxy 30ml/35g

Product detailed description

The excellent quality of this very fast-setting two-component epoxy adhesive ensures extremely fast, clear and strong bonding and repairs with a strength of 100 kg/cm2. The adhesive is resistant to moisture, oils, solvents, diluted acids and alkalis. It has a temperature resistance of -40°C to +80°C. The adhesive is crystal clear after hardening.

Scope of application:
It is suitable for very fast bonding and repairs of metals, wood, chipboard, thermosets, hard PVC, laminates, ceramics, porcelain, glass, concrete, stone, rubber, polystyrene foam and the like, both between themselves and with each other. It is not suitable for bonding plasticized PVC, PP, PE, Teflon and silicone.

Instructions for use:
The bonded parts must be clean, dry and degreased. Unscrew the caps of both tubes, squeeze out the filler and hardener in a ratio of 1:1 (two equal strips) and mix thoroughly - the workability of the adhesive is 2 min. Apply the adhesive to one side, for rough and porous materials on both sides, press both surfaces together and fix for 5 min. (using clamps or tape). Clean the ends of the tubes thoroughly and close them. At room temperature, the joint reaches handling strength after 5 min. The joint reaches functional strength after 12 hours. The minimum working temperature is 18°C.

Strength table depending on temperature and time:
Time Strength [kg/cm2]
5 minutes ... 25
10 minutes ... 44
1 hour ... 80
1 month ... 100