Speed ​​Epoxy II Glue 4min 224g

Product detailed description

Epoxy adhesive Speed ​​Epoxy II 4 min is also suitable for parts that are exposed to vibrations. It creates a long-term flexible and strong connection. Speed ​​Epoxy II 4 min should not be used for bonding in places with long-term exposure to water - e.g. submerged parts of ships. However, it can be used without any problems for bonding the internal parts of ship hulls. It also bonds polyester resins. After mixing with microballoons, it is possible to create a quick sealant for repairs. The joint can be stressed after 15 minutes, full strength is achieved after about 1 hour.

Speed ​​Epoxy II is very tolerant of the wrong ratio of hardener and resin. Special formulas shorten the time to gain full strength.

Speed ​​​​Epoxy II 4 min is suitable for bonding: Balsa and wood, White metal, Lexan, Glass and ceramics, Depron, Carbon, Styrene, etc.

Packaging: 224 g in bottles

Safety warning:

Speed ​​​​Epoxy II - resin (Adhesive)
Content of hazardous substances: bis[4-(2,3-epoxypropoxy)phenyl]propane; formaldehyde; oligomeric reaction products with 1-chloro-2,3-epoxypropane and phenol

Store at a temperature of 5 - 25 ° C out of the reach of children.

First aid
In case of skin contact: Immediately rinse the skin with plenty of soap and water.
In case of eye contact: Immediately rinse the eyes with plenty of water while holding the eyelids open. Remove contact lenses and continue rinsing. If problems occur, seek medical attention.
In case of ingestion: Immediately rinse mouth and provide fresh air. Do not induce vomiting. Seek medical attention.
If inhaled: Remove person to fresh air and seek medical advice. If unconscious, place in recovery position and seek medical advice.

H315 - Causes skin irritation. H317 - May cause an allergic skin reaction. H319 - Causes serious eye irritation. H411 - Toxic to aquatic life with long lasting effects. P261 - Avoid breathing dust/fume/gas/mist/vapours/spray. P273 - Avoid release to the environment. P280 - Wear protective gloves/protective clothing/eye protection/face protection. P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P333 + P313 - If skin irritation or rash occurs: Get medical advice/attention. P501 - Dispose of contents/container in accordance with local, national and international regulations.

Speed ​​​​Epoxy II - Hardener
Contents of hazardous substances: Reaction products of pentaerythritol, propoxylated and 1-chloro-2,3-epoxypropane with hydrogen sulfide

Keep cool, out of reach of children.

First aid
Skin contact: Remove contaminated clothing if it is not stuck to the skin. Immediately flush skin with plenty of soap and water. Get medical attention if problems occur.
Eye contact: Remove contact lenses if possible. Immediately flush eyes with plenty of water while holding eyelids open. Continue rinsing for at least 15 minutes. Get medical attention.
If swallowed: Immediately rinse mouth with water. Get medical attention.
If inhaled: Remove person to fresh air.

H315 - Causes skin irritation. H317 - May cause an allergic skin reaction. H319 - Causes serious eye irritation. H361 - Suspected of damaging fertility or the unborn child. H412 - Harmful to aquatic life with long lasting effects. P261 - Avoid breathing dust/fume/gas/mist/vapours/spray. P264 - Wash hands thoroughly after handling. P280 - Wear protective gloves/protective clothing/eye protection/face protection.P305 + P351 + P338 – IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P308 + P313 – If exposed or concerned: Get medical advice/attention. P321 – Get specialist treatment (see … on label).