KAVAN PRO PNEU Medium CA glue 20g

Product detailed description

Top quality thin superglue (cyanoacrylate) with high strength for model and general use, specially optimized for bonding RC car tires. Comes in a bottle with a clog-resistant applicator tip.Top quality thin superglue (cyanoacrylate) with high strength for model and general use, specially optimized for bonding RC car tires. Comes in a bottle with a clog-resistant applicator tip.
Medium superglue with medium viscosity is ideal for bonding absorbent and non-absorbent materials that adhere well to each other. Bonds wood, most plastics, metals, rubber, glass, ceramics, cork, paper.
Typical application method: The adhesive is applied to the joint of perfectly matched parts placed together. The low viscosity of the adhesive ensures perfect penetration into the depth of the joint.

Properties

• Colour: clear
• Viscosity: 801120 mPa∙s
• Density: 1.04 – 1.06 g/cm³
• Optimal application temperature: 23 °C
• Curing time (depends on temperature and nature of bonded materials): e.g. nitrile rubber <5 s, stainless steel 15–20 s
• Full cure: 24 h
• Shear strength: 15–25 N/mm²
• Operating temperature range: -10 to +40 °C
• Max. temperature range: -40 to 85 °C
• Optimal gap width between bonded parts: zero
• Cured adhesive is soluble in: acetone, dimethylformamide, acetonitrile

Recommended activator: KAV56.9983.CZ KAVAN PRO activator CA spray 150ml, KAV56.9984.CZ KAVAN PRO activator CA spray 200ml
Recommended debonder/debonder: KAV56.9979.CZ KAVAN CA debonder 20g
Removing excess uncured adhesive: cloth or paper towel moistened with acetone (if the bonded materials can withstand it).
Thinning the adhesive: If the superglue thickens, it is a sign that it has already partially polymerized and is losing its original properties - no "dilution" can restore them. If you need a "thinner" superglue, simply use a type with a lower viscosity. The individual types of KAVAN PRO superglues can be mixed together to achieve the optimal viscosity.
Use as a sealant, suitable fillers: microballoon filler KAV56.9980.CZ CA KAVAN filler.
Suitable for bonding: RC car tires, soft and hard wood, chipboard, plywood, metals, ceramics, porcelain, glass and carbon laminates, glass and carbon fabrics and fibers, many plastics (including EPP and EPO).
Not suitable for bonding: expanded polystyrene, polyethylene, Teflon, silicone.
Storage: in a tightly closed container, in a cool, dry and dark place (at a temperature of +2 to +10 °C). Do not expose to temperatures below +2 °C.
Shelf life: If the conditions of proper storage are observed, we guarantee durability in unopened original packaging for 1 year while maintaining the above-mentioned product properties.