Speed ​​Epoxy II Glue 20min in Injection Applicators 224g

Product detailed description

Speed ​​​​Epoxy II 20 min is a 20-minute epoxy resin. After hardening, it creates a flexible joint, largely resistant to long-term water exposure. It is used for bonding strong wooden structures and laminate. The joint can be stressed after 60 minutes, full strength is achieved after 3 hours at room temperature.

The new Speed ​​​​Epoxy II line is much more tolerant of incorrect hardener-resin ratios than the original. Special formulas shorten the time to achieve full strength.

Speed ​​​​Epoxy II 20 min is suitable for bonding: Balsa and wood, White metal, Lexan, Glass and ceramics, Depron, Carbon, Styrene, etc.

Package in syringes 224 g

Safety warning:

Speed ​​​​Epoxy II - resin (Adhesive)

Content of hazardous substances: bis[4-(2,3-epoxypropoxy)phenyl]propane; formaldehyde; oligomeric reaction products with 1-chloro-2,3-epoxypropane and phenol

Store at a temperature of 5 - 25 ° C out of the reach of children.

First aid
In case of skin contact: Immediately rinse the skin with plenty of soap and water.
In case of eye contact: Immediately rinse the eyes with plenty of water while holding the eyelids open. Remove contact lenses and continue rinsing. If problems occur, seek medical attention.
In case of ingestion: Immediately rinse mouth and provide fresh air. Do not induce vomiting. Seek medical attention.
If inhaled: Remove person to fresh air and seek medical advice. If unconscious, place in recovery position and seek medical advice.

H315 - Causes skin irritation.H317 - May cause an allergic skin reaction.H319 - Causes serious eye irritation.H411 - Toxic to aquatic life with long lasting effects.P261 - Avoid breathing dust/fume/gas/mist/vapours/spray.P273 - Avoid release to the environment.P280 - Wear protective gloves/protective clothing/eye protection/face protection.P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P333 + P313 - If skin irritation or rash occurs: Get medical advice/attention.P501 - Dispose of contents/container in accordance with regional and international regulations.

Speed ​​​​Epoxy II - Hardener
Contents of hazardous substances: Reaction products of pentaerythritol, propoxylated and 1-chloro-2,3-epoxypropane with hydrogen sulfide

Keep cool, out of reach of children.

First aid
Skin contact: Remove contaminated clothing if not stuck to skin. Wash skin immediately with plenty of soap and water. Get medical advice/attention if problems persist.
Eye contact: Remove contact lenses, if possible. Immediately flush eyes with plenty of water, holding eyelids open. Continue rinsing for at least 15 minutes. Seek medical attention.
If swallowed: Rinse mouth immediately with water. Seek medical attention.
If inhaled: Move affected person to fresh air.

H315 - Causes skin irritation.H317 - May cause an allergic skin reaction.H319 - Causes serious eye irritation.H361 - Suspected of damaging fertility or the unborn child.H412 - Harmful to aquatic life with long lasting effects.P261 - Avoid breathing dust/fume/gas/mist/vapours/spray.P264 - Wash hands thoroughly after handling.P280 - Wear protective gloves/protective clothing/eye protection/face protection.P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P308 + P313 - IF exposed or concerned: Get medical advice/attention.P321 - Get professional treatment (see ... on label).