Roket Blaster Cyanoacrylate glue activator 50ml

Product detailed description

Roket Blaster is a catalyst that, thanks to the increase in pH, enables rapid polymerization of instant adhesives applied in a thick layer on non-absorbent surfaces. The activator is supplied in a container with a sprayer. Thanks to the special formula, it does not attack even clear acrylic plastics!

The activator is supplied in a container with a sprayer and a brush.

Packaging: 50ml

How to use

• When gluing materials that are difficult to glue or large areas, the activator is applied to one surface and the adhesive to the opposite part of the surface
• After they are connected, the parts will be glued within 6 to 10 seconds without any reduction in the holding force
• When working with the activator, great care must be taken to ensure that it does not get into the container with instant adhesive

Safety warning

Signal word: Danger!

Hazardous substance content: Naphtha (petroleum), hydrogenated light

Keep cool and dark, out of the reach of children.

In case of skin contact: Remove contaminated clothing and wash skin with soap and water. Seek medical attention if irritation persists.
In case of eye contact: Rinse immediately with plenty of water. Remove contact lenses, if present, and hold eyelids apart as wide as possible. Continue rinsing for at least 15 minutes and seek medical attention.
In case of inhalation: Remove person to fresh air and keep warm and at rest in a position comfortable for breathing. If breathing has stopped, provide artificial respiration. In case of difficulty, oxygen may be administered by trained personnel. Keep the affected person under observation. If problems persist, seek medical attention. Show the label to the physician.
In case of ingestion: Seek medical attention immediately. Keep the affected person under observation. Do not induce vomiting. If vomiting occurs, keep head low to prevent vomit from entering lungs. Aspiration into lungs after swallowing or vomiting may cause pneumonia. Show label to physician.

Standard Hazard Statements: H225 - Highly flammable liquid and vapor. H304 - May be fatal if swallowed and enters airways. H315 - Causes skin irritation. H336 - May cause drowsiness or dizziness. H400 - Very toxic to aquatic life. H410 - Very toxic to aquatic life with long lasting effects.

Safe Handling Instructions: P210 - Keep away from heat/sparks/open flames/hot surfaces. No smoking. P240 - Ground/bond container and filling equipment. P243 - Take precautions against static discharges. P273 - Avoid release to the environment. P233 - Keep container tightly closed. P241 - Use electrical/ventilating/lighting/.../... equipment suitable for explosive atmospheres. P242 - Use only non-sparking equipment. P261 - Avoid breathing dust/fume/gas/mist/vapours/spray. P264 - Wash hands thoroughly after handling. P271 - Use only outdoors or in a well-ventilated area. P280 - Wear protective gloves/protective clothing/eye protection/face protection. P301 + P310 - IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician. P302 + P352 – IF ON SKIN: Wash with plenty of soap and water. P303 + P361 + P353 – IF ON SKIN (or hair): Remove/take off all contaminated clothing. Rinse skin immediately with water/shower. P304 + P340 – IF INHALED: Remove person to fresh air and keep comfortable for breathing. P312 – Call a POISON CENTER or doctor/physician if you feel unwell. P321 – Get medical attention (see … on label). P331 – Do not induce vomiting. P332 + P313 – If skin irritation occurs, get medical advice/attention. P362 – Take off contaminated clothing and wash before reuse. P370 + P378 – In case of fire: Use foam, carbon dioxide, dry chemical or water fog to extinguish. P391 – Collect spillage. P403 + P233 – Store in a well-ventilated place. Keep container tightly closed. P403 + P235 – Store in a well-ventilated place. Store in a cool place. P405 – Store locked up.