Ocean Liner Queen Mary 2 1/700

Product detailed description

The kit is discounted due to the missing small piece of plastic on the tip of the left half of the hull. The kit is brand new, untouched.

Ocean Liner Queen Mary 2 1/700   Revell 05231

A plastic model kit of a luxury ocean liner.

Scale: 1/700
Number of parts: 323
Length: 494 mm

Recommended Revell colors: 302, 34, 371, 378, 04, 05, 83, 89, 09, 91

General information: Plastic kit, contains unassembled and unpainted parts. Some types of kits also contain additional metal, PUR and rubber parts. Warning, contains small parts, keep out of reach of children under 3 years. Not suitable for children under 14 years.

To assemble the model, you need to purchase: plastic glue, paints, brushes, modeling tools. Gift Set / Model Set kits may include basic paints, glue and a brush.

Good advice - recommendation
To achieve the perfect look for car or truck models, or if you need to paint a larger area (hulls and wings of civil aircraft, ship hulls...), we recommend spraying the surface with TAMIYA spray (a wide selection of shades can be found in our stock offer) or with an airbrush. A model with a sprayed surface has a much more realistic appearance than one painted with a brush or left in the color of the plastic.

Model construction
The building instructions in the kit are usually illustrated, without text. With a slow and careful step-by-step procedure, even an adult beginner can build this model. First, carefully study the model building instructions and check the completeness of the kit. Prepare a workbench, tools (tweezers, model knife, pry bar, various brushes), glue and paints. It is advisable to prepare a small box where you can put the finished building groups while the glue dries. Separate the parts from the frame with sharp plastic cutters or a sharp model knife. Be careful not to let the part jump off and get lost. Always separate from the frame only the part that you will use immediately. Apply glue only in the smallest amount necessary and only to the contact surfaces of the parts. The cleaner your work is, the more beautiful the result will be. Do not rush when building, it is usually better to let the glue dry thoroughly, even if it is until the next day.

Painting the model
Use special model paints, which usually give you the best result. Before painting, it is a good idea to thoroughly degrease the surface of the model. It is a good idea to paint some small parts directly in the frame before you separate them from the frame. Use a thin pointed brush to paint small parts. Use a wide flat brush to paint large areas of the model. For a more beautiful appearance of the model, we recommend using model spray paint or a model spray gun when painting larger areas. The result is always better than a surface painted with a brush. Always let the individual colors dry well, this will prevent you from ruining the entire model just because you are impatient.

Working with stickers
The kit usually includes "decal" stickers, which must be carefully cut out and soaked in warm water for 20-30 seconds before application. Then remove them from the water and place them on a smooth, non-absorbent surface (such as a glass table) for a while. The sticker (decal) will first curl slightly and then straighten out under the influence of the water. After about a minute, try to very carefully move the sticker on the backing paper. If it moves freely, you can carefully transfer it to the desired location on the model. First, slightly moisten the area where you want to place the sticker with water, or use a drop of softener for stickers. Then place the sticker on the model and carefully remove excess water with a soft cloth or paper towel. Press the sticker briefly against the surface with your finger and a dry soft cloth. Be careful, if you have used softener, do not touch the surface of the sticker unnecessarily until it has dried, as you can completely destroy it.

Health protection
We recommend using a respirator or other respiratory protection when sanding. Dust generated when sanding plastic, PUR parts, 3D print parts, or sealants can later cause health problems. We also recommend using eye protection. Small parts can fly off during work and endanger your eyesight. We recommend using protective gloves when working with paints and thinners. The workplace should be well ventilated.