Carson RC Reflex Stick Pro 4 2.4GHz LCD

Product detailed description

4-channel lever 2.4GHz RC set with LCD display suitable for controlling RC models. The package also includes a 4-channel receiver with FailSafe.

Package contents: Carson RC Reflex Stick Pro 4 LCD transmitter, 4-channel receiver (500501548), multilingual instructions.

Features:

• 15 memory slots for models
• Two continuously adjustable, fully proportional channels
• Two 2-position switches
• Servo reverse
• Trim setting for channels 1–2
• Dual rate for channels 1 and 2 (limits steering and reduces speed)
• EPA for channels 1–2
• EXP for channels 1–2
• Fail safe

Technical data:

• Transmitter operating voltage: 4.8 – 6 V (4x AA batteries)
• Receiver power supply (without BEC) possible up to 11 V
• Connectors: Futaba/Graupner J/R
• Range: 150m

Pairing the receiver with the transmitter:

1. Turn off the receiver and transmitter
2. Connect the "pairing cable" to the pins in the PAIR position on the receiver (from the side of the receiver)
3. Turn on the receiver (connect the ESC or RX battery), the LED on the receiver will start flashing
4. Turn on the transmitter
5. Pull out the pairing jumper on the receiver, reinsert it and pull it out again in quick succession. The LED on the receiver stops flashing and lights up continuously. Pairing is complete.
6. Turn off both the receiver and the transmitter, remove the pairing jumper. When you turn on the transmitter again, the receiver is already paired.

Note: Sometimes pairing is lost if the power battery is weak. Always restore pairing with fully charged batteries.

Additional purchase required: 4xAA batteries for the transmitter.