Carson RC Reflex Stick Pro 4 2.4GHz

Product detailed description

3-channel 2.4GHz stick RC set suitable for controlling RC models. The package also includes a 4-channel receiver with FailSafe.

Package contents: Carson RC Reflex Stick Pro 4 transmitter, 4-channel receiver (500501548), multilingual instructions.

Features:

• 2 continuously adjustable, fully proportional channels
• 2-position switch for channel 3
• Dual rate function for channel 1 (servo travel adjustment)
• Servo reverse
• Trim adjustment for channels 1–2
• Battery status indicator via LED
• Fail safe

Technical data:

• Transmitter operating voltage: 4.8 – 6 V (4x AA batteries)
• Receiver power supply (without BEC) possible up to 11 V
• Connectors: Futaba/Graupner J/R
• Range: 150m

Pairing the receiver with the transmitter:

1. Turn off the receiver and transmitter
2. Connect the "pairing cable" to the pins in the PAIR position on the receiver (from the side of the receiver)
3. Turn on the receiver (connect the ESC or RX battery), the LED on the receiver will start flashing
4. Turn on the transmitter
5. Remove the pairing jumper on the receiver, re- insert and pull out again in quick succession. The LED on the receiver stops flashing and lights up continuously. Pairing is complete.
6. Turn off both the receiver and transmitter, remove the pairing jumper. When the transmitter is turned back on, the receiver is paired.

Note: Sometimes pairing is lost if the power battery is weak. Always re-pair with fully charged batteries.

Need to purchase: 4xAA batteries