Servo Kavan GO-11T46MG (0.065s/60°, 8.5kg.cm) digital

Product detailed description

Powerful and very fast programmable narrowband digital miniservo 41g with brushless motor, titanium gears and wide voltage range 4.8-8.4V, 2xBB, for use as tail servo for RC helicopters 380-500 with advanced gyro control systems. Thrust 5.0kg.cm, speed 0.090s/60° at 4.8V, thrust 6.0kg.cm, speed 0.080s/60° at 6.0V, thrust 7.5kg.cm, speed 0.072s/60° at 7.4V, thrust 8.5kg.cm, speed 0.065s/60° at 8.4V. Aluminum box for perfect cooling under high load.
Powerful and very fast narrowband digital standard servo 41g with brushless motor with titanium gears and output shaft mounted on two ball bearings for use as a trim rotor servo in RC helicopters 380-500. For perfect cooling even under high loads, the servo is housed in an aluminum box.

Narrowband servo - neutral 760 µs, repetition rate up to 666 Hz - only for use with compatible gyro systems/flybarless controllers as a trim (tail) rotor servo; cannot be connected directly to the output of a conventional receiver (neutral 1520 µs). Make sure to set the correct type (narrow band) servo on your gyro/controller.

• The servo is programmable.
• Extended supply voltage 4.8-7.4 V (nominal).
• Output shaft with 25 teeth/5.92 mm spline.

Servo size - Mini
Servo type - Digital
Programmable - Yes
Thrust at 4.8 V [kg∙cm] - 5
Thrust at 6.0 V [kg∙cm] - 6
Thrust at 7.4 V [kg∙cm] - 7.5
Thrust at 8.4 V [kg∙cm] - 8.5
Speed ​​at 4.8 V [s/60std.] - 0.09
Speed ​​at 6.0 V [s/60std.] - 0.08
Speed ​​at 7.4 V [s/60std.] - 0.072
Speed ​​at 8.4 V [s/60std.] - 0.065
Servo gears - Titanium
Ball bearings - 2×
Highvoltage - Yes
Power supply [V] - 4.8 - 8.4
Length [mm] - 35.5
Width [mm] - 15
Height [mm] - 29.2
Weight [g] - 41
Designed for - Helicopters