Servo Hitec HS-5087 MH Hi Volt

Product detailed description

Powerful digital microservo 22g with metal gears and increased supply voltage (up to 2S LiPo) for electroplanes and gliders. 1xBB, thrust 4.3 kg/cm, speed 0.13s/60st at 7.4V. Programmable.

Powerful digital microservo with metal gears and ball bearing with increased supply voltage for electroplanes, gliders and smaller motor and aerobatic models and electrohelicopters.

"High Voltage" successor to the popular microservo HS-85MG allows you to use power from 2S Li-pol or Li-Fe (or 5-cell NiCd/NiMH or 5.5 or 6.0 V BEC/UBEC) receiver batteries without the need for additional power stabilizers and the risk of reduced service life. In conjunction with modern 2.4 GHz Optima or Minima receivers, you can have an on-board installation that is very simple and reliable again.

With the Hitec HFP-10*, HFP-20, HFP-25, HPP-21 or HPP-21 Plus digital servo programmer, you can program:

• Reset to factory defaults,
• Deadline bandwidth
• Direction of rotation
• Speed ​​of rotation
• Neutral
• Deflection size
• Turn fail-safe on or off
• Setting emergency fail-safe deflection
• Servo overload protection (power limitation 0-50% in case of overload)

Note: It is not possible to program overload protection with the older HFP-10 programmer.

Servo size - Micro
Servo type - Digital
Thrust at 6.0 V [kg/cm] - 3.6
Thrust at 7.4 V [kg/cm] - 4.3
Speed ​​at 6.0 V [s/60deg.] - 0.17
Speed ​​at 7.4 V [s/60deg.] - 0.13
Servo gears - Metal
Ball bearings - 1×
Highvoltage - Yes
Power supply [V] - 6 - 7.4
Length [mm] - 29
Width [mm] - 13
Height [mm] - 30
Weight [g] - 21.9
Designed for - Airplanes, Helicopters, Road cars, Sailboats, Boats