ESC Controller Hobbywing QuicRun WP 1080 G2 80A

Product detailed description

ESC controller - Electronic bidirectional controller 80A for DC motors of the QuicRun series specially designed for RC models of the Crawler type. Controller with built-in BEC circuit, completely waterproof and dustproof.

Features

• Specially developed for 1:10 RC cars with special functions for rock crawlers and expedition cars
• For DC motors of size 540-550
• Compact dimensions, low weight
• Waterproof and dustproof construction, waterproof electronic switch
• Ideal in combination with Hobbywing QUICRUN 540 and 555 Brushed motors
• 15 programmable parameters
• Possibility of remote adjustment of the braking effect on the transmitter while driving
• Special driving mode "real car" with manual reverse gear (If this mode is selected, pushing the throttle control always means braking; the purpose is to simulate a real car and smoothly drive down a slope using the brake control. Switching the direction of rotation of the motor will be done using the switch assigned to the auxiliary (AUX) channel on the transmitter. Thanks to this, when you press the throttle control, the car will go forward or backward depending on the position of the auxiliary channel switch. If, for example, the maximum braking effect is not enough to stop the car on a slope, you can also try to switch the direction of rotation of the engine and smoothly descend the slope with the engine in reverse.)
• Powerful switched BEC stabilizer up to 4 A with selectable voltage 6.0 V, 7.4 V or 8.4 V
• Advanced protection functions (voltage protection, thermal protection, fail-safe, etc.)
• Programmable with the help of a transmitter or LED programming box

Application - Car
Type - DC
Continuous current [A] - 80
Max. peak current [A] - 400
Lipo cells - 2 - 3
NimH cells - 5-9
Length [mm] - 362
Width [mm] - 316
Height [mm] - 170
Weight [g] - 58.5
Regulation - bidirectional
Brake - Yes
Sensor input - Yes
Programmable - Yes
Water resistance: splash-proof (waterproof)
BEC voltage [V] - 6 - 7.4
BEC current [A] - 3

Note on water resistance: A product marked by the manufacturer as waterproof (WP, waterproof, water resistance) is usually able to withstand short-term exposure to splashing water, for example, running through a puddle, short-term driving on wet grass, in light rain, in snow, etc. ATTENTION! Waterproof does not mean watertight! A waterproof product is not able to withstand the effects of a higher column (pressure) of water, which means that it is not possible to immerse such a product under the water surface. To achieve watertightness in the case of a waterproof product, it is recommended to either use, for example, Nanoprotech, or place the device in a perfectly sealed package.
Only products clearly marked as watertight with manufacturer-guaranteed watertightness to a clearly marked immersion depth (water column, water pressure, etc.) can be submerged for an extended period of time under water.