DSYS DSO1S Opto Switch

Product detailed description

The DSO1S (W) OPTO is designed to switch the power supply for components such as controllers, servos, receivers, sound modules, pumps, winches, cranes, relays, motors, sirens, horns, beacons, smoke generators, high-power LEDs, LED strips/bars, and light bulbs in battery-powered models.

Features:

• Simple operation.
• Switching capabilities: sirens, horns, beacons, light bars, high-power LEDs (bars/strips), bulbs, smoke generators, winches, relays, and motors.
• Single-channel control via stick position, steering wheel, or a 2-position (2P) or 3-position (3P) switch.
• 1 controllable output with a current rating of 9A (15A for 3s).
• Switch activation indicated by a red LED (S ON) on the board and an external LED connected via cable to connector K1 (+L-).
• Receiver power connection indicated by a green LED (UR) on the board.
• Suitable for RC cars, boats, aircraft, trucks, tanks, mechanical models, etc.
• The electronic switch (MOSFET) is optically (galvanically) isolated from the control circuit, allowing the load to be switched to either the positive (+) or negative (-) battery terminal.
• The switch is ready for immediate operation.

Technical Specifications

Type - DSO1S
Current - 9A (15A for 3s)
Batteries - 4-12 NiCd/NiMH, 2S-4S Li-Po/Li-Ion/Li-Fe (A123), Pb 6V/12V
BEC - No
Protections - Overcurrent; special coating for protection against moisture and mechanical shock
Parameters - Switched on / Switched off
Dimensions - 32 x 23 x 7 mm

Package contents: DSO1S switch (SW 1.1), user manual, Z2P socket for connector K1, Z3P socket for connector K2, V3P plug for connector K3, 5mm red LED, LED holder, 2mm/5cm heat-shrink tubing, two-core cable (0.15 mm²) – two 30 cm lengths.