Carson RC FS 14-Channel Reflex Stick Pro 4 LCD 2.4GHz

Product detailed description

14-channel 2.4GHz stick-style RC system with an LCD display, suitable for controlling RC models. The package also includes a 15-channel receiver with FailSafe.

NOTE: Carson Reflex Stick Pro 4 transmitters and receivers are not compatible with the older generation Carson Reflex Stick 2 transmitters and receivers.

Package contents: Carson RC FS 14K Reflex Stick Pro 4 LCD transmitter, 15-channel receiver (500501552), and a multilingual manual. Features:

• Four continuously adjustable, fully proportional channels
• Channels 7, 8, 9, 10, 13, and 14 controlled via 3-position switches
• Channels 5, 6, 11, and 12 controlled via 3-position buttons with a center position
• Servo reversing (direction change for channels 1–4)
• Trim function for channels 1–4
• Dual Rate for channels 1 and 4 (servo travel range adjustment)
• 100% compatibility with TAMIYA MFC 01/02/03 and DMD units
• Fail-Safe system (signal loss protection)
• Control sticks with a precise, smooth mechanism
• Modern, ergonomic RC transmitter housing
• Memory for up to 15 models
• EPA for channels 1–4 (servo travel limits)
• EXP function for channels 1–4 (exponential control sensitivity adjustment)

Technical specifications:

• Transmitter operating voltage: 4.8 – 6 V (4× AA batteries)
• Receiver power supply (without BEC): up to 11 V supported
• Connectors: Graupner J/R

Pairing:

1. Turn off the transmitter, install the receiver in the model, and ensure no other transmitter is turned on nearby.
2. Power on the model; the receiver LED will begin to flash slowly.
3. Press the BIND button; the LED will start flashing rapidly.
4. Turn on the transmitter; it will pair with the receiver within a few seconds.
5. The receiver LED will remain steadily lit.

Note: Pairing may be lost if the power battery is weak. Always perform the re-pairing process with fully charged batteries.

Required (sold separately): 4x AA batteries.