Sport Cub AS3X BNF

Product detailed description

RC model of the Sport Cub aircraft for beginners with a wingspan of 1300 mm powered by a powerful AC motor. The multi-purpose recreational model has large Tundra wheels for off-road flying, optional flaps and the possibility of adding floats. AR636A receiver with AS3X electronic stabilization system.

The model is powered by a powerful 480 960 rpm AC motor with an 18 A AC controller. The rudders, elevators and ailerons are controlled by fast servos. After adding servo flaps, the flap function can also be used.
The motor with propeller and cone, controller and rudder servos are installed, so preparation for flight is very fast. Nothing needs to be glued, the model is assembled using a screw connection.
The chassis is made of flexible wire with a plastic fairing. Large all-terrain wheels Tundra will allow flying even on less quality terrain, a controlled spur with a wheel is installed for taxiing. The Li-Pol 11.1V 1300mAh battery is placed under the cover on the lower part of the fuselage. It is also possible to use a larger battery, thanks to a sufficiently large battery compartment. On the upper side of the wing profile are placed turbulators that prevent the separation of the flow lines and thus allow a reduction in stall speed.

Spektrum AR636A Receiver
The Spektrum AR636A receiver features revolutionary AS3X technology, which helps stabilize the model in flight. The receiver includes a three-axis MEMS gyro and accelerometer. Thanks to electronic stabilization, the model is easier to control, eliminating sudden gusts of wind, which makes it easier to fly acrobatic elements. Since all stabilization settings are stored in the receiver, a regular transmitter without programming functions is sufficient for controlling the models. The receiver has fixed settings and cannot be programmed.

Features:

• Installed and programmed Spektrum AR636A receiver
• Installed powerful 480 960 rpm/V brushless motor
• Installed 18 A brushless controller
• Installed fast aileron, elevator and rudder servos
• Durable Z-Foam construction
• Large Tundra off-road wheels
• Turbulators on the leading edge of the wing significantly improve flight characteristics
• The model can be easily fitted with optional Super Cub floats (HBZ7390)
• Optionally, the model can be fitted with flaps
• Easy access to the battery, thanks to the large space it is possible to use batteries with a higher capacity

We recommend purchasing:
To get started, you need at least a 5-channel RC kit - the 5th channel switches flight modes, if you want to control the flaps as well, then you need a 6-channel kit. Optionally, the model can be equipped with floats (HBZ7390) and a servo for flap control (PKZ1090) and a drive battery.

Parameters
Propeller - 9 x 6
Span - 1300 mm
Length - 865 mm
Flaps - Optional
Flight weight - 945 g
Material - Z-Foam
Regulator 18A AC
Drive - Brushless motor 480 960Kv
Construction - EPP