R16F receiver

Product detailed description

The Radiolink R16F 2.4GHz is a 16 channel FHSS frequency hopping receiver with telemetry compatible with the Radiolink T12D and T16D transmitters. It offers four operating modes:

• with standard width modulated (PWM) signal servo outputs (16 PWM channels on outputs CH1-16)
• with S.BUS serial output and PWM channels (15 PWM channels on outputs CH1–15 + S.BUS on CH16)
• with S.BUS serial output, CRSF input and output and PWM channels (13 PWM channels on outputs CH1-13 + CRSF (RX) on CH14/CRSF (TX) on CH15 + S.BUS on CH16)
• with CRSF input and output and PWM channels (14 PWM channels on outputs CH1–13 and CH16 + CRSF (RX) on CH14/CRSF (TX) on CH15)

The receiver is suitable for models of all categories - the manufacturer's stated range is up to 4000 m in the air (under ideal conditions, without interference).

The use of FHSS transmission technology brings high resistance to interference and the possibility of setting emergency deviations (fail-safe) in case of failure or strong interference of the transmitter signal. Pairing with the transmitter is done with the help of the pairing button on the receiver, the operating states are indicated by the LED light. The receiver is equipped with contact bars for standard UNI connectors (=JR/Graupner, Hitec, Futaba); the outlets are oriented in the direction of the longitudinal axis of the receiver. The receiver enables the transmission of basic telemetry data - receiver supply voltage, received signal strength (RSSI) and external (e.g. drive) battery voltage in the range of 3–33.6 V (1–8S LiPo). When using the Radiolink control unit, it can transmit additional telemetry data from the control unit to the T12D or T16D transmitter. The operating range of supply voltages 3–12 V enables operation with a supply from 1–2S LiPo/Li-ion, 2S LiFe, 4-8 cells. NiMH or BEC stabilizers 5-12 V. The receiver has updateable firmware (using the USB-C connector).

Kit includes: R16F receiver, manual.

Dimensions 45x32x15 mm
Weight 17g.