Nanoprotech Electronics Professional Spray 150ml

Product detailed description

GNP Eletronics Professional protects all sensitive electronics from oxidation, moisture and short circuits. In many cases, it can even save drowned electronics and restore standard functionality.

While NANOPROTECH Electric is recommended for the treatment of high-voltage electrical equipment, GNP Electronics Professional is ideal for low-voltage electronics. Its great advantage is that the solution is colorless and dries completely after application, so the surface is not greasy and no dust remains on it. Therefore, it is especially suitable for the treatment of RC models, drones, mobile phones, cameras, electric bicycles, electric scooters, computers, laptops and other low-voltage electronics.

The solution is colorless and dries after application

Especially when treating sensitive electronics, you will appreciate that the treatment with the Electronics Professional spray does not stain the treated surface. In addition, the solution dries after application, so there are no greasy spots left behind that dust or other dirt would stick to.

First aid for drowned electronics

When water gets into electronics, irreversible damage can occur. GNP Electronics Professional is first aid for drowned electronics and also serves as a prevention against damage. In the event of drowning, turn off the device completely and disassemble it. Apply a thin layer of solution directly to the contacts. Wait at least 15 minutes, but 24 hours is recommended. Then you can disassemble the device and turn it on.

Restores and cleans contacts

In older electronics, contacts often break, most often due to their oxidation or the presence of moisture. If you encounter a similar problem, treat the damaged contacts with GNP Electronics Professional spray. Nanoparticles will help clean oxidized contacts and make them permeable, thus extending the life of all electronics.

Where to use the spray:

• RC models (control units, regulators, servo motors, connectors)
• Cameras
• Mobile phones
• Electric bicycles and electric scooters
• Batteries and their contacts
• Connectors and contacts of all kinds
• PCs, laptops
• And other sensitive electronics

Technical properties:

• Acts as anti-corrosion and insulation protection
• Resists temperatures from -80 °C to +160 °C
• Works for up to 1 year
• Consumption: approx. 50 ml per 1 m2
• Contents: 150 ml

How to use the spray:

Apply the spray in well-ventilated areas and preferably with protective gloves and goggles.

1. Shake the spray thoroughly before applying.
2. Apply a thin layer to the intended surface (from a distance of 20-30 cm) or use the spray directly on the treated area.
3. Wait 10-15 minutes after application and then wipe off excess solution.

Composition
GNP Electronics Professional contains: mixture of several substances, hydrocarbons, C7-C9, n-alkanes, isoalkanes, propane-butane.