AK Interactive Color Set - Modern Royal Air Force Aircraft Colors SET 3G

Product detailed description

AK-Interactive 3rd generation acrylic paint set suitable for airbrushing or brush painting. The set is suitable for painting or spraying aircraft used by the Royal Air Force since the second half of the 1960s.

The set includes:

• AK11840 RAF Dark Green
• AK11843 RAF Medium Sea Grey BS381C/637
• AK11851 RAF Dark Sea Grey BS381C/638
• AK11852 RAF PRU Blue BS381C/636
• AK11853 RAF Light Aircraft Grey BS381C/627
• AK11854 RAF Camouflage (Barley) Grey BS381C/626
• AK11855 RAF Dark Camouflage Grey BS381C/629
• AK11856 RAF Camouflage Beige (Hemp) BS381C/389

Note: The color shade presented on the monitor or in print form may differ slightly from the real one.

Modeling acrylic paint intended for painting or spraying on plastic, polyurethane, metal, wood, ceramics, textiles, or other suitable surface. Non-flammable base, dries quickly - after 1 hour the surface can be repainted, fully dries within 24 hours. Well-dried base paint creates a hard, durable surface that can be easily sanded under water with fine sandpaper to achieve a completely perfect surface.

Not suitable for children under 8 years of age. Children must always be supervised by an adult when working with paint. In case of contact with eyes and mucous membranes, rinse with clean water and seek medical attention. If swallowed, do not induce vomiting, seek medical attention immediately. Do not drink or eat the contents of the container, do not apply it to your skin.
H phrases: none. P phrases: none. Symbols: none.

Good advice: This acrylic paint is used to paint the surface of, for example, a model. Before painting or spraying with the final surface paint, it is a good idea to spray the surface with a shade of the base paint, depending on which surface paint you will subsequently paint the model with. It is also advisable to use the corresponding light shade of the base under light shades of surface paints. Subsequent work with paints is much more comfortable and the result is absolutely perfect.

Mix the paint well before use. Apply to a well-degreased, dry, clean surface. After work, always close the container tightly, the paint dries with air access. Always wipe the lid of the container dry, do not let paint residues dry even on the edge. This will extend the shelf life of the paint after re-sealing.

Thinning: Use only original AK Interactive 3GEN Thinner (AK11500). Using a thinner of another brand may cause the paint to deteriorate. Clean water is also suitable for thinning when painting, but thinner is recommended for spraying.

Painting: The paint is supplied in such a density that it can be used immediately. It is therefore suitable for painting smaller areas and parts with a brush. For minor repairs, it can be applied with a brush in several layers. Thin it with water or thinner as needed.

Spraying: The paint must be significantly diluted for spraying. The dilution ratio usually needs to be tested individually depending on the type of airbrush and whether you are spraying an area or a line. The dilution ratio can range from 1:1 to 1:3 (paint:thinner), but if necessary, you can dilute it appropriately with thinner (or a small amount of water), even more.

Drying time: The paint dries to the touch literally "before your eyes" within a few minutes. Drying can be accelerated with a hair dryer. For further painting/spraying with a new layer, just wait 30 - 40 minutes until the original layer dries. Complete drying takes about 24 hours.

Cleaning: After using the tool, wash it immediately with water. While the paint is fresh, it can be completely washed off without leaving traces. We recommend Airbrush Cleaner Tamiya, Revell Airbrush Cleaner, or another brand to clean the an airbrush.