KAVAN PRO aktivátor CA spray 200ml CZ

Product detailed description

Activator/accelerator for instant (cyanoacrylate) adhesives in aerosol packaging with reduced content of hazardous substances. It is used to accelerate the curing of instant adhesives in conditions unfavorable for their natural curing (reaction with air humidity or water contained in the glued parts) in dry environments, in cold conditions, when gluing inactive materials or when applying a thick layer of adhesive. The product contains its own component that activates the polymerization of the instant adhesive, solvents and propellant gas (propane/butane). For this reason, it must not be used when gluing materials that are not resistant to organic solvents (e.g. expanded polystyrene).

The activator is applied from a distance of 20-25 cm to a clean and dry surface, the optimal working temperature range is +10 °C to +30 °C. It can be applied in one of two basic ways:

Small parts: The activator is applied to one of the bonded surfaces and left to dry (it remains active for several hours). Then apply superglue to the other joining surface and glue the parts together.

Large parts: Apply superglue to one of the joining surfaces, press the parts together and spray the joint with the activator.

Suitable for: superglues when bonding materials resistant to organic solvents.

Not suitable for: polystyrene foam and other materials that are not resistant to organic solvents or elevated temperatures (accelerated polymerization of the adhesive can release a significant amount of heat, which leads to heating of the bonded joint and its surroundings - the more adhesive is used).

Storage: in a tightly closed container, in a cool, dry and dark place (at a temperature of +5 °C to +25 °C). Do not expose to temperatures below +2 °C.

Safety Warning:

Contains: acetone. H-phrases: H222 - Extremely flammable aerosol. H229 - Pressurized container: May burst if heated. H319 - Causes serious eye irritation. H336 - May cause drowsiness or dizziness. EUH 066 - Repeated exposure may cause skin dryness or cracking. P-phrases: P102 - Keep out of reach of children. P210 - Keep away from heat/sparks/open flames/hot surfaces. No smoking. P211 - Do not spray on an open flame or other ignition source. P251 - Pressurized container: Do not pierce or burn, even after use. P261 - Avoid breathing gas/mist/vapours/aerosols. P271 - Use only outdoors or in a well-ventilated area. P282 - Wear heat-resistant gloves/face shield/eye protection. P305 + 354 + 338 IF IN EYES: Rinse immediately with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P405 - Keep locked up. P410 + 412 - Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F. Dispose of contents/container to hazardous or special waste collection point. Symbols: below.