Carson RC Reflex Wheel Pro 4 2.4GHz + 5kg Servo

Product detailed description

3-channel steering wheel 2.4GHz RC kit suitable for controlling RC models. This professional remote control system offers many setting options that can be conveniently changed using the function buttons. Ergonomic handle and steering wheel at a comfortable 4-degree angle. Steering precision is increased by the use of a ball bearing on the steering wheel. The package also includes a 4-channel receiver with FailSafe and a 5kg steering servo.

Package contents: Carson Reflex Wheel Pro 4 transmitter, 4-channel receiver (500501548), 5kg steering servo, multilingual instructions.

Technical data:

• Transmitter operating voltage 3.6 to 4.5 V
• Receiver power supply (without BEC) is possible up to 6V
• Channel 3 programmable as a button or switch (servo)
• Connector system for Futaba and Graupner-J/R
• Steering servo: 5kg (JR connector)

Features:

• 2 step-by-step adjustable and fully proportional channels
• Ball bearing on the steering wheel for more precise control
• LED battery status indicator
• Failsafe function
• Ergonomically shaped foam steering wheel at a four-degree angle
• Waterproof* 4-channel receiver
• Servo reverse (reverses the direction of travel for channels 1 and 2)
• Trim adjustment for control and throttle
• Dual rate for channels 1 and 2 (limits steering and reduces speed)
• Memory for 15 models
• Range up to 200m

Need to purchase: 4x AA batteries for the transmitter or rechargeable batteries

Pairing the receiver with the transmitter:

1. Turn off the receiver and transmitter
2. Connect the "pairing cable" to the pins in the PAIR position on the receiver (from the side of the receiver)
3. Turn on the receiver (connect the ESC or RX battery), the LED on the receiver will start flashing
4. Turn on the transmitter
5. Pull out the pairing jumper on the receiver, reinsert it and pull it out again in quick succession. The LED on the receiver will stop flashing and light up permanently. Pairing is complete.
6. Turn off the receiver and transmitter, remove the pairing jumper. After turning on the transmitter again, the receiver is already paired.

Note: Sometimes pairing is lost if the power battery is low. Always re-pair with fully charged batteries.