Carson RC set Reflex Wheel Pro 4 2.4GHz LCD + BL-Set + 6kg Servo

Product detailed description

4-channel steering wheel 2.4GHz RC set with LCD display suitable for controlling RC models. This professional remote control system offers many setting options that can be conveniently changed using the function buttons. Ergonomic handle and steering wheel at a comfortable 4-degree angle. Steering accuracy is increased by the use of ball bearings on the steering wheel. The package also includes a 4-channel receiver with FailSafe, 6kg steering servo and a Carson brushless motor and controller set..

Package contents: Carson Reflex Wheel Pro 4 LCD transmitter, 4-channel receiver (500501548), 6kg steering servo, Carson brushless motor and controller set. multilingual instructions.

Technical data:

• Transmitter operating voltage 3.6 to 4.5 V
• Receiver power supply (without BEC) possible from 3.5 to 10 V
• Channel 3 programmable as button or switch (servo)
• Channel 4: 3-stage switch
• Connector system for Futaba and Graupner-J/R
• Servo: 6 kg, JR connector
• AC motor: 3300 kV (rpm/V), no-load speed: 24420 rpm output power: approximately 350W (short-term), continuous current: 47A
• Brushless ESC, continuous current: 60A, peak current: 360A, Suitable for 6-cell NiMH or 2S LiPo batteries

Features:

• 2 step-by-step adjustable and fully proportional channels
• Ball bearing on the steering wheel for more precise steering
• LED battery status indicator
• Failsafe function
• Ergonomically shaped foam steering wheel at a four-degree angle
• Waterproof* 4-channel receiver
• Servo reverse (reverses the direction of travel for channels 1 and 2)
• Trim adjustment for control and throttle
• Dual rate for channels 1 and 2 (limits steering and reduces speed)
• Memory for 15 models
• ABS and EXP function
• Range up to 200m

Need to purchase: 4x AA batteries for the transmitter or rechargeable batteries.

Pairing the receiver with the transmitter:

1. Turn off the receiver
2. Connect the "pairing cable" to the PAIR pins on the receiver (from the side)
3. Turn on the receiver
4. Turn on the transmitter (If the LED is permanently on, the transmitter is paired with the receiver)
5. Turn off the receiver and disconnect the "pairing cable")