Ballast Bond adhesive for fixing loose materials 100ml

Product detailed description

Ballast Bond 100ml is a special thin adhesive that creates a matte surface after drying. Ideal for dioramas or model railways. It is especially suitable for gluing loose material (sand, soil, gravel, coal) to locomotive tenders, cargo in wagons and trucks, for landscape creation or for fixing gravel between sleepers in a model railway.

Simply drip the thin adhesive into the shape of the loose material and let it dry. This will fix and reinforce the shape. The low viscosity will not cause the stones to move - after applying the adhesive, the surface structure will not change.

How to use
Use the usual procedures to create the surface structure as you need. Apply an appropriate amount of the product to the surface with a pipette, syringe or similar applicators. The surface structure can be adjusted approximately 5 minutes after application, after which the product will begin to harden.

Key properties of Ballast Bond adhesive

• The adhesive is ready for application. There is no need to dilute or mix anything.
• Thanks to its thin consistency, it does not cause a change in the surface structure - it does not move stones.
• The adhesive is odorless, safe to use. Also suitable for model rings.
• Excellent for large areas, fixing coal or other materials in wagons.
• Prevents algae from settling in a humid environment.
• 100 ml package is sufficient for approximately 0.35 m².

Safety warning
Store at a temperature of 5 - 25 ° out of the reach of children.

First Aid

• Skin Contact: Wash affected areas with soap and water.
  
• Eye Contact: Flush eye with running water with eyelids held open for 15 minutes. Remove contact lenses and continue rinsing. Seek medical attention if problems persist.
  
• Ingestion: Rinse mouth and give large amounts of water. Do not induce vomiting. Seek medical attention.
  
• Inhalation: Move affected person to fresh air.