AK Interactive QUICK GEN Color - Desert Sand 18ml

Product detailed description

AK Interactive's special water-resin based paint reduces the number of steps and techniques required to paint figures with traditional acrylic paints (top coat, shadows, highlights) to one step after applying a base coat of paint (primer).

The range of colors offers a choice of basic, metallic or military shades. Some colors vary in intensity (low, medium, high).

For perfect results, it is recommended to use a white primer.

Volume: 18ml

Note: The color shade presented on the monitor or in print form may differ slightly from the actual one.

Modeling acrylic paint intended for painting or spraying on plastic, polyurethane, metal, wood, ceramics, textiles, or other suitable surface. Non-flammable base, dries quickly - after 1 hour the surface can be repainted, fully dries within 24 hours. Well-dried base paint creates a hard, durable surface that can be easily sanded under water with fine sandpaper to achieve a completely perfect surface.

Not suitable for children under 8 years of age. Children must always be supervised when working with paint. In case of contact with eyes and mucous membranes, rinse with clean water and seek medical attention. In case of ingestion, do not induce vomiting, seek medical help immediately. Do not drink or eat the contents of the container, do not apply it to the skin.
H phrases: none. P sentences: none. Symbols: none.

Good advice: This acrylic paint is used to paint the surface of, for example, a model. Before painting or spraying with the final surface paint, it is a good idea to spray the surface with a shade of the base paint, depending on which surface paint you will subsequently paint the model with. It is also advisable to use the corresponding light shade of the base under the light shades of the surface paints. Subsequent work with the paints is much more comfortable and the result is absolutely perfect.

Mix the paint well before use. Apply to a well-degreased, dry, clean surface. After work, always close the container tightly, the paint dries with air access. Always wipe the lid of the container dry, do not let the paint residues dry even on the edge. This will extend the shelf life of the paint after re-closing.

Thinning: Use only the original thinner (Medium for Quick Gen Paints AK17081 or AK17080). Using a thinner of another brand may damage the paint.

Painting: The paint is supplied in such a density that it can be used immediately. It is therefore suitable for painting smaller areas and parts with a brush. For minor repairs, it can be applied with a brush in several layers. If necessary, thin it with thinner.

Airbrushing: The paint must be significantly diluted for spraying. The dilution ratio usually needs to be tested individually depending on the type of spray gun and whether you are spraying an area or a line. The dilution ratio can range from 1:1 to 1:3 (paint:thinner), but if necessary, you can dilute it even more with thinner.

Drying time: The paint dries to the touch literally "before your eyes" within a few minutes. Drying can be accelerated by using a hair dryer. For further painting/spraying with a new layer, just wait 30 - 40 minutes until the original layer dries. Complete drying takes about 24 hours.

Cleaning: After using the tool, wash it immediately with water. While the paint is fresh, it can be completely washed off without leaving any traces. We recommend Airbrush Cleaner Tamiya, Revell Airbrush Cleaner, or another brand to clean the spray gun.